Level 2 specification

NR/L2/TEL/30151

Design and installation of station cabling

Clause map — what each clause deals with

1	Purpose	Aims — better cabling standards on stations
2	Scope	Design and installation of telecom cables and routes on stations
3	Definitions	Definitions
4	Roles and responsibilities	Roles — infrastructure manager, station facility owner
5.1	Site survey	GRIP 4 site survey scope
6.1.1	General	New routes — renew/expand existing first
6.1.2	Temporary installations	Temporary installations
6.1.3	Routing of new cable routes	Routing out of public view
6.1.4	Capacity in new cable routes	Capacity margins
6.1.5	Service life	Service life of station routes
6.1.6	Materials	Materials — sub-surface considerations
6.1.7	Cable tray	Cable tray use
6.1.8	Cable ties	Cable ties — cautions
6.1.9	Clipping cables directly to surfaces	Clipping single tails direct to surfaces
6.2	Existing cable routes	Using existing routes — appearance, capacity, ownership
6.3	Flexible conduit	Flexible conduit for tails
6.4	Working At Height Regulations	Working at height
6.5	Draw ropes	Draw ropes in spare pipes
7.1	Capacity	Future capacity in trunk cables
7.2	Cable types	Cable types for location/environment
7.3	Cabling for induction loops	Induction loop cabling — points to 30134
8	Labelling	Cable labelling — ownership, service, destinations
9	Station locations	Location-by-location notes — platforms, roof voids, retail, canopies, booking hall, ticket office, equipment rooms, control room, lifts, bridges, refuges