Level 2 specification
NR/L2/TEL/31001
Telecom maintenance testing & fault investigation process
Issue 4, 03 March 2018 · Maintenance & faulting
The telecom maintenance testing and fault investigation process (TMT&FIP) — very detailed, test-by-test
Section headings
We have not yet written plain-words notes for every clause of this one; the headings below show its shape.
| 1 | Purpose | |
| 2 | Scope | |
| 3 | Roles and responsibilities | |
| 4 | Definitions | |
| 5 | Introduction | |
| 6 | General Requirements | |
| 8 | Failure Investigation Process | |
| 9 | Maintenance Testing | |
| 11 | Arrange for testing and recording of induced longitudinal and transverse voltage on the | |
| 12 | Check and set all alarm threshold/current limits in accordance with | |
| 13 | Check and restore all alarm settings in accordance with manufacturer’s | |
| 10 | Check correct operation of call set–up in accordance with calling instructions | |
| 17 | Additionally for ETD Telephones | |
| 7 | Observe and record any existing alarms (where appropriate) or management | |
| 14 | Test, after reconnection of traffic, correct functionality to an appropriate level | |
| 20 | Additionally for ETD telephones | |
| 19 | Check for picture stability, clarity and focus and that moving objects do not | |
| 21 | Check that a complete image of viewing target appears in at least one monitor |